Maintenance methods for different stages of stone-plastic flooring

- Dec 19, 2018-

(i) cleaning and maintenance after floor laying/pre-use

1. Remove the dust and debris from the floor surface first.

2. Use a scrubbing machine plus 3M red grinder or similar products low speed cleaning (with a strong general detergent 1:20 diluted with water added to the scrub), remove the floor surface of the protective wax, grease, dust and other dirt, with the water suction machine to suck the sewage dry.

3. Wash and suck dry with water.

4. On 1-2 layers of high-strength surface wax, as required.

Cleaning Agent: Powerful general detergent high-strength facial wax

Tools: Grinding Machine red grinder water suction machine wax towing water Machine

(ii) Daily cleaning and maintenance 1. Push dust or vacuum cleaner to vacuum. (Drag and pull the dust agent on the ground, dry and then push the dust.)

2. Wet drag. (Use floor cleaning glazing agent to dilute by 1:20 to water and mop the floor with a half-wet tug.)

If necessary, you can also use a scrubbing machine with wash & shine low speed cleaning.

Cleaning agent: Ground towing dust agent Floor cleaning Glazing Agent

Tools: Dust Push MOP

(iii) Regular cleaning and maintenance

1. Push dust or vacuum cleaner to vacuum.

2. Floor cleaning Glazing Agent in accordance with 1:20 water dilution, towing or with high-speed polishing machine with red grinding plate for scrub.

3. Upper 1-2 layers of high-strength surface wax.

4. As required, can be combined with high-speed polishing machine plus white polishing pad polishing treatment.

Cleaning agent: Floor Cleaning Glazing agent high-strength surface wax

Tools: Dust Grinding machine red, white grinder water suction machine wax towing water Machine

(iv) thorough refurbishment of treatment

1. Push dust or vacuum cleaner to vacuum.

2. Use strong wax removal water 1:10 diluted evenly applied to the ground, wait 5-10 minutes, with a scrubbing machine plus red grinder low speed cleaning, wax removal.

Use the water suction machine to drain the sewage in time.

3. Wash and drain with water until no residual detergent is left on the ground.

4. On 1-2 layers of high-strength surface wax, as required.

Cleaning agent: Floor Cleaning Glazing agent high-strength surface wax

Tools: Dust Grinding machine red, white grinder water suction machine wax towing water Machine

(v) Treatment of special dirt

1. Oil: Local oil pollution, the water-based oil removal agent raw liquid directly poured on the towel wipe; large area of oil, the only water deoiling agent according to 1:10 dilution, with the wipe machine plus red grinding plate low speed cleaning.

2. Black Offsctdruckereien: With spray cleaning maintenance wax with high-speed polishing machine plus white polishing pad polishing treatment.

For the longer time black offset printing, you can put a strong black offset printing remover directly poured on the towel wipe treatment.

3. Glue or chewing gum: with a professional strong glue remover directly poured on the towel wipe to remove. Cleaning agent: Water-based deoiling agent spray Maintenance wax strong black Offset Printing remover strong glue remover.